Wireless Car Rearview System is easy to install, easy to wire. It is economical and practical, and currently widely used.
Install wireless reversing video system, follow these steps:
1, Remove the license plate.
2, Remove the trunk floor.
3, Open the license plate light cover.
4, The camera power cable from the vehicle license plate light penetration hole, and fixed-line.
5, The camera fixed on the plate rack.
6, The camera negative relationship between the power line is received by reversing the power on lights.
7, Restore the rear of the demolition of parts.
8, Connect the display power supply into the cigarette lighter, replce well of the display.
9, Start the car, hanging reverse files, then display the reverse image.
Special Reminder:
1, In the camera when the power cord through the tail covered with small wire pulling more root system. That would be more favoring.
2 After installation, please note that check in the parking camera and check whether the luminous light is turned on, and if that does not turn so it is the power is not connected.
3, shall be able to launch panel on the front of the leading car parts. Can not be placed on the back cover of the steel sandwich in the car, it might as steel barrier will affect the camera and the display is installed after the non-poor signals or images.
Install wireless reversing video system, follow these steps:
1, Remove the license plate.
2, Remove the trunk floor.
3, Open the license plate light cover.
4, The camera power cable from the vehicle license plate light penetration hole, and fixed-line.
5, The camera fixed on the plate rack.
6, The camera negative relationship between the power line is received by reversing the power on lights.
7, Restore the rear of the demolition of parts.
8, Connect the display power supply into the cigarette lighter, replce well of the display.
9, Start the car, hanging reverse files, then display the reverse image.
Special Reminder:
1, In the camera when the power cord through the tail covered with small wire pulling more root system. That would be more favoring.
2 After installation, please note that check in the parking camera and check whether the luminous light is turned on, and if that does not turn so it is the power is not connected.
3, shall be able to launch panel on the front of the leading car parts. Can not be placed on the back cover of the steel sandwich in the car, it might as steel barrier will affect the camera and the display is installed after the non-poor signals or images.
没有评论:
发表评论