Ways to Mount a Wall TV

This new kind of TV is thinner and lighter than original flat place board. Wall TV makes it easy to install them for homeowners. The steps involved still, in this article they will try to accompany you through these steps.

The first step is to decide where you want to go on your TV. Obviously, your TV need basically and comfort from you considerable attraction. However, there are two things, you need to consider the height and screen storm. Then you will be comfortable to watch TV, if it is high, then will be tired to watch your wall TV, it causes of neck pain. The best way to decide the height is to find a comfortable viewing position and eye where you plan to the TV and this is usually you need to place on television. Screen glare is usually depends on the amount of light flow into the room, So try to keep away from receiving position to direct sunlight.

Now its time to mount the TV part of the mount, wall mounts are generally composed of two pieces one that you'll attach to the TV, & another that you'll mount to the wall. The portion on the TV then attaches to the piece on the wall, it is that, you've got a wall-mounted TV. Your first step will be to attach the TV portion of the mount to the back of your TV, some models have the holes covered with plastic, use a screwdriver to pry those off. keep in mind try not to lay the TV down in the work of this routine. Now align the holes in the mount to the hole in the back of your TV & screw them in, the screws for these holes are usually included in the mounting kit.

The next step is deciding the way you are going to run your cables, there's a selection of ways to conceal your power & A/V cables; from quick & simple cover-ups to more labor-intensive in-wall options. It's a nice idea to figure out how you'd like to manage your wires before deciding where to mount your TV, since some spots may be more conducive to your preferred technique than others. keep in mind that the location has to be accessible to a power source & A/V outlet, its a nice idea to measure your cables & the distance to the outlets to make definite they will reach.

The last step is to run the cables before you hang the TV, to there desired location lift the TV & connect the cables to it, & finally connect the wall mount to the TV portion of the mount. In this step it is strongly advised that you have a helper to assist you to lift & mount the TV. Most mounts accessible today are gravity held, so there is no require to screw anything in one time you have the TV on the mount, unless your mount also offers security features, & this usually only requires tightening the security screws.